PVC Washing Machine Hose
Prices include GST. Shipping calculated at checkout.
Pickup available at Brisbane
Usually ready in 2-4 days
- Australia-wide delivery
- Brisbane warehouse pickup
- Secure checkout
- (07) 3890 3359
Need a large quantity? Contact our trade team for pricing.
Description
Our PVC washing machine hose (part PHH12) is a 12.5 mm (1/2") bore white PVC hose for the hot and cold water supply to washing machines and dishwashers. It is reinforced with high tenacity polyester yarn, rated to 16 bar (232 psi) at 20°C and sold by the metre from 5 m to 100 m, so you can run one continuous hose to a tap on the far side of the laundry instead of joining short pre-made hoses. It is stocked in our Brisbane warehouse; full specifications are in the table below.
Key features
- 12.5 mm inside diameter, 19.8 mm outside diameter
- Working pressure 16 bar (232 psi) at 20°C, manufactured to a 4:1 pressure safety factor
- Operating temperature -5°C to +60°C, so the same hose serves the hot and the cold tap
- Non-marking white PVC with a UV-stabilised cover
- Polyester yarn reinforcement stops the hose kinking or ballooning under mains pressure
- Cut per metre in 5 m steps to 60 m, plus 10 m and 20 m coils and a 100 m roll
Applications
- Hot and cold inlet hoses for domestic and commercial washing machines
- Dishwasher water supply
- Long inlet runs where the tap is some distance from the appliance
- Replacing perished or split factory inlet hoses
Compatibility and fitting
The hose pushes over standard 12 mm (1/2") barbed hose tails. Washing machine taps and appliance inlets are normally 3/4" BSP, so pair it with a hose tail carrying the thread to match your tap from our brass fittings range, and secure each end with a 13-25 mm worm-drive clamp from our hose clamps.
Frequently asked questions
Can this hose be used on the hot water tap? Yes. It is rated for service to +60°C, which covers the tempered hot water supplied to a washing machine or dishwasher.
How long can a washing machine hose be? The hose is sold by the metre up to 100 m. Keep the run as short as practical and avoid tight bends.
See the rest of our PVC hoses for wash-down, air and suction hose in other sizes.
Product specifications
- Usage
- Hot and cold water supply to washing machines and dishwashers
- Material
- White PVC, polyester yarn reinforced
- Cover
- UV stabilised white PVC, non-marking
- Reinforcement
- High tenacity polyester yarn
- Working pressure
- 16 bar (232 psi) at 20°C
- Temperature range
- -5°C to +60°C
- Inside diameter
- 12.5 mm (1/2")
- Outside diameter
- 19.8 mm
- Length
- Sold by the metre, 5 m to 100 m
- Colour
- White
Shipping and returns
Dispatched from our Brisbane warehouse. Australia-wide delivery, or collect from the warehouse once your order is confirmed ready.
Verified customer reviews