63mm PVC Oil Suction Hose Blue

The 63 mm bore, PSHB065, is a bulk suction size for tank and pit work where a 50 mm hose is limiting the pump. Outside diameter is 74.4 mm, so the fittings and clamps step up with it. It shares the 0.6 MPa (87 psi) working pressure of the 50 mm size at 20°C, which makes the choice between them purely a matter of flow. The wall is heavy duty blue PVC with a rigid PVC helix and a high nitrile content for mineral oils and animal fats.

Key features

• 63 mm inside diameter, 74.4 mm outside diameter
• Heavy duty blue PVC with a rigid PVC helix
• High nitrile content for oil and fat resistance
• Working pressure 0.6 MPa (87 psi) at 20°C
• Operating temperature -5°C to +60°C
• Cut 2 m, 5 m, 8 m, 10 m and 15 m, or a 20 m coil

Applications

• Bulk oil suction from underground tanks
• Waste and environmental recovery trucks
• Liquid waste and septic servicing at volume
• Industrial chemical unloading
• Pit and sump emptying on plant sites

Compatibility and fitting

• Takes 63 mm camlock tails clamped over the helix
• Watch the bend radius: a large bore hose kinked at the pump inlet loses more flow than the extra bore gained
• Other bores in the range are on PVC oil suction hose blue

Is 63 mm the same as 65 mm?

The supplier publishes this hose as a 63 mm nominal bore with a 74.4 mm outside diameter. It is sometimes listed under 65 mm as a trade size, but order and fit to the 63 mm figure.

Dispatched from our Brisbane warehouse. Australia-wide delivery, or collect from the warehouse once your order is confirmed ready.