63mm Layflat Hose Blue

At 63 mm, LF063B is where the blue range moves off the farm and onto site work. The bore is 63 mm with a 67 mm outside diameter and a 60 psi (4.1 bar) rating at 20°C. Flat when empty, it folds into a bin instead of taking up a reel. Keep it strictly on the discharge leg: a layflat wall carries no helix, and a pump inlet will draw it flat in seconds.

Key features

• 63 mm bore, 67 mm outside diameter
• 60 psi (4.1 bar) maximum working pressure at 20°C
• Blue PVC over high tensile textile cord
• Rated -10°C to +60°C
• UV stable cover for lines left rigged between shifts
• Available in 1 m to 25 m cut lengths and 50 m, 75 m and 100 m rolls

Applications

• Discharge from larger dewatering and trash pumps
• Temporary irrigation mains across a paddock
• Pumping down excavations, trenches and pits
• Bypass lines when a fixed main is off
• Flood recovery and water diversion

Compatibility and fitting

• Take-off is a 63 mm hose tail or camlock, clamped top and bottom of the barb
• See camlocks for cam and groove couplings in this size
• Clamp choice matters on a thin wall; browse hose clamps
• Pair with grey PVC suction hose on the pump inlet
• Higher pressure work is covered by red layflat hose

Does the pressure rating drop as the bore gets bigger?

Yes. This bore is rated 60 psi where the 32 mm size takes 100 psi, because pressure acts across a larger area of the same wall. Size the hose to the pump outlet and check the rating each time.

Dispatched from our Brisbane warehouse. Australia-wide delivery, or collect from the warehouse once your order is confirmed ready.